Erosion control matting is a lightweight synthetic or organic mat that is staked to the soil’s surface and intended to stabilize it over months to years. These mats help stabilize the soil by reducing soil temperature and providing moisture conservation. Although these mats are costly, they are worth investing in certain areas. For more information on erosion control matting, visit https://www.erosioncontrolco.net/hydroseed-colorado-springs.
The type of erosion control mat that you choose should depend on the worksite and landscape conditions. Semi-permanent erosion control blankets will degrade over time, whereas permanent mats will remain in place for longer periods of time. Both types of mats contain different blends of fibers and should degrade over time. They also require regular inspections to ensure that they are working effectively. The right type of mat is essential for the job.
Once you have installed an erosion control mat, it is time to start monitoring it. Regularly check the material for damage and adjust it as necessary. During long periods of drought, it may be necessary to irrigate the mat. In these instances, you should apply 3,000 gallons of water per acre. Make sure that you irrigate the soil at night to minimize evaporation. You should also check for proper soil grading.
Before installing your erosion control matting, you should prepare the site. Large areas of soil need to be level and properly prepared. You may have to amend the soil with fertilizer or aeration. If you are seeding your soil, you should install the erosion control blanket at least 48 hours before planting. The loosely woven mesh in erosion control blankets allows plants to grow through it easily. In addition to soil aeration, you should fertilize the soil in areas where water and precipitation may occur.
Erosion control mats come in two main types: long-term and short-term. There are several types of these mats, but not all of them work for the same purposes. Short-term mats, for example, last about 18 months and are usually applicable for mild to moderate slopes. In addition, you can use non-woven erosion control mats in the case of commercial and residential applications. Soil erosion control mattings are not just for the lawn – they also provide soil protection and prevent mudspillage.
When installing erosion control matting, you must dig a small trench on the top of the matting before installation. This is especially important for hills and slopes. Otherwise, gravity will drag the matting downward. Depending on the type of terrain, you may need to drill a small hole at the top before you can install the mat. Once the soil is in place, you should tamp the soil down and secure it with fasteners to prevent the top layer of the matting from shifting.
Erosion control mats also help stabilize soil particles and sediments. They prevent soil particles from sliding and creating an environment for new plant growth. They help protect the seed from being destroyed by wind, rain and water, and they also help protect and promote new plant growth. A biodegradable erosion control blanket is ideal for soil that is prone to eroding. This type of erosion control blanket will not harm the environment and will not be costly.
Geotextiles and burlap are two types of erosion control mattings. Geotextiles are susceptible to erosion before and after planting, so they may not be the best option for every site. Burlap, a popular landscaping material, is a good choice for slopes. However, it is important to note that geotextiles can break down and decompose in the soil, so if your site has a steep slope, you should use a biodegradable geotextile.
Biodegradable mats are made from agricultural straw or coconut fiber with 1.5 inch (3.8 cm) centers. The fabric is sewn together using degradable thread. The biodegradable mats are usually made from coconut fiber and are made with a polyester-polypropylene matrix. Once you place them on your property, they form an erosion control blanket that will last for years. These mats are great for a variety of landscape purposes.
It is important to inspect RECP sheeting regularly, especially after heavy rainstorms. Repairs should be made if any of the strips are missing. If a patch washed away, you should fix the slope. Soil preparation is essential to ensure proper contact between the RECP and the soil. It is not recommended to roughen the soil before applying RECPs. Soil preparation includes grading and removing any obstacles that may be in the way of installing the mat.